CXRacing 1JZ-GTE VVTI Swap Kit for 89-99 Nissan 240SX S13 S14 S15 Stock Turbo

This Kit Has Most of the Parts Needed for the Swap, Comes With:

Intercooler and Piping Kit, Radiator Top Water Pipe, Turbo Back Exhaust System, and Turbo Intake Kit

Application:
- Chassis: 89-99 Nissan 240SX S13 S14 S15
(Parts are Developed from US Model Left Hand Drive Chassis, But Should Fit both LHD and RHD)

- Motor: JDM Toyota 1JZ-GTE VVTI
(Does NOT Fit 1JZ-GTE None VVTI Which is Different)

- Turbo: Stock Turbo
(Does Not Fit Single Turbo Upgrade, We Offer This Kit Separately)

Note:This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues.

Product Being Sold:
- Intercooler and Piping Kit, With Big Front Mount Intercooler, Aluminum Piping Kit with BOV
- 3" Stock Turbo Intake Pipe and Filter
- Radiator Top Aluminum Water Pipe, Fits Radiator Has Top Water Outlet on Left , or Driver Side (SR20DET Style, As Shown on Pictures, Radiator is NOT Included)
- 3" Turbo Back Exhaust System, All the Way from Turbo Elbow to Exhaust Tip

For 1JZ-GTE VVTI Swap on 240SX, Engine Exhaust is on the Right Hand Side, Instead of Having It on the Left Side Like Stock 240SX. This Kit is Designed to Run the Exhaust System on the Right Hand Side, Connects from Turbo Elbow to Muffler Pipe.

This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation.

Product Info and Spec:
Intercooler:
- Core Size: 24"x12'x3"
- Overall Size: 31"x12"x3"
- 3" Inlet & Outlet
- 3" core, Bar and Plate Design
- 100% Aluminum

Piping Kit:
- Mandrel Bent Aluminum Pipe
- 3" Cold Side Pipes
- 2.5" Hot Side Pipes
- Comes with BOV, Silicon Hoses, and T-Bolt Clamps
- Built In MAF Sensor Flange, Fits Factory MAF Sensor.

Radiator Pipe:
- Top 1.5" Aluminum Water Pipe (Bottom Uses Stock Hose, Not Included)

Turbo Back Exhaust:
- 3" Stainless Steel Pipe, All the Way from Turbo Elbow to Exhaust Tip
- 4" Single Tip Muffler, Exits the Same as Stock on the Left Side

Turbo Intake Kit:
- 3" Aluminum Intake Pipe
- 3" Air Filter
- Connects to Factory Air Flow Meter Unit

Notes:
- Off Road or Track Use ONLY, NOT for Street Use
- Due to the Complexity of Swapping a Motor to Different Chassis, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project
- Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only (of Our Complete Swap Kit). Check Our Other Website Items

Click Below Picture to See Flowbench Test of the Intercooler:

Highlights:
- Especially Designed, Made for the Application Stated
- Fully Tested, Simple Easy Installation
- Offers Excellent Performance Gains
- One of the Best Kits on the Market, with High Quality Products and Affordable Pricing

Items_Included:
- Bar & Plate Intercooler, With Mounting Brackets
- Aluminum Piping Kit with Hoses, Clamps, and BOV
- Turbo Back Exhaust System (3 Pcs)
- 1.5" Top Water Pipe
- Turbo Intake Pipe and Air Filter

Below Are Installation Pictures:

Click Below Picture to See Youtube Video of Related Product


 
 
 
 
 
 
 
 
 
 
 

Write a review

Please login or register to review

1JZ-GTE-VVTI 1JZ Engine Swap Kit Intercooler Downpipe Catback For 240SX S13 S14

  • Brand: CXRacing
  • Product Code: TRB-KIT-1JZGTE-VV-STOCK-IC-RAD-PIP-CB
  • Availability: In Stock
  • $1,315.00


Available Options


Tags: CXRacing 1JZ-GTE VVTI Swap Kit for 89-99 Nissan 240SX S13 S14 S15 Stock Turbo This Kit Has Most of the Parts Needed for the Swap, Comes With: Intercooler and Piping Kit, Radiator Top Water Pipe, Turbo Back Exhaust System, and Turbo Intake Kit Application: - Chassis: 89-99 Nissan 240SX S13 S14 S15 (Parts are Developed from US Model Left Hand Drive Chassis, But Should Fit both LHD and RHD) - Motor: JDM Toyota 1JZ-GTE VVTI (Does NOT Fit 1JZ-GTE None VVTI Which is Different) - Turbo: Stock Turbo (Does Not Fit Single Turbo Upgrade, We Offer This Kit Separately) Note:This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues. Product Being Sold: - Intercooler and Piping Kit, With Big Front Mount Intercooler, Aluminum Piping Kit with BOV - 3" Stock Turbo Intake Pipe and Filter - Radiator Top Aluminum Water Pipe, Fits Radiator Has Top Water Outlet on Left, or Driver Side (SR20DET Style, As Shown on Pictures, Radiator is NOT Included) - 3" Turbo Back Exhaust System, All the Way from Turbo Elbow to Exhaust Tip For 1JZ-GTE VVTI Swap on 240SX, Engine Exhaust is on the Right Hand Side, Instead of Having It on the Left Side Like Stock 240SX. This Kit is Designed to Run the Exhaust System on the Right Hand Side, Connects from Turbo Elbow to Muffler Pipe. This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation. Product Info and Spec: Intercooler: - Core Size: 24"x12'x3" - Overall Size: 31"x12"x3" - 3" Inlet & Outlet - 3" core, Bar and Plate Design - 100% Aluminum Piping Kit: - Mandrel Bent Aluminum Pipe - 3" Cold Side Pipes - 2.5" Hot Side Pipes - Comes with BOV, Silicon Hoses, and T-Bolt Clamps - Built In MAF Sensor Flange, Fits Factory MAF Sensor. Radiator Pipe: - Top 1.5" Aluminum Water Pipe (Bottom Uses Stock Hose, Not Included) Turbo Back Exhaust: - 3" Stainless Steel Pipe, All the Way from Turbo Elbow to Exhaust Tip - 4" Single Tip Muffler, Exits the Same as Stock on the Left Side Turbo Intake Kit: - 3" Aluminum Intake Pipe - 3" Air Filter - Connects to Factory Air Flow Meter Unit



Emissions Control Warning:

It is illegal to sell, install, or offer for sale any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system. Product(s) listed here is(are) solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for use on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

All Products by CX-GARAGE are solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for used on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.