CXRacing T76 Turbo Header Downpipe + Intercooler Piping Kit For 1979-1993 Fox Body Ford Mustang with GM LS1 Engine Swap

This Is CXRacing's Latest Turbo Kit for Fox Body Mustang LS1 Swap, Bolt On Fitment, Makes Big Power:
- T76 with 0.81 Exhaust AR Supports 700 HP with Quick Spool.
- Perfectly Merged Collector, Dual 44mm Vband Wastegate.
- Cross Pipe Runs Under the Pulley, Cleaner Setup and Look.
- Big 4" Core Intercooler
- 50MM BOV.
- 3" Aluminum Piping.
- 3" Stainless Steel Downpipe

Note:This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues.

Comes with:
- Turbo Headers + Cross Pipe + Turbo + Wastegates + Downpipe + Intercooler and Piping Kit

Notes:
1. This Kit On This Item Is Part of CXRacing's Complete LS1 Swap Kit, Some Installed Pictures Shown Below Have Other Parts from The Complete Kit, But NOT All Parts Are Included for This Item. We Offer Many Different Combinations, Please Check Our Other Items.

2. Needs Rear Sump Oil Pan. We Offer It Separately (Part #: OP-LS1-300ZX)

3. Need to Drill Oil Return Port on the Oil Pan for Turbo Oil Return.

4. Need to Work On the Exhaust System to Connect to the Downpipe (Due to Many Exhaust Options, The Downpipe Is NOT Connected to Stock Exhaust).

5. This Kit Is For Turbo Hardware ONLY, You Will Need to Upgrade Engine's Fuel System and Tune the Engine.

6. There Is NO Installation Guide Provided, However, We Show Many Installed Pictures On Car and On Engine Stand.


Application:
- Chassis: 1979-1993 Ford Mustang
- Motor: LS1

Product Being Sold:
- Turbo Headers + Cross Pipe + Turbo + Wastegates + Downpipe + Oil Line Kit + Intercooler Kit + Silicon Hoses + Clamps + Mounting Brackets

Note: Engine/Transmission Mounts Kit, Radiator and Hard Pipe Kit, Oil Pan Are NOT Included.

Product Info and Spec:
Headers/Manifold Kit:

- 304 Stainless Steel Headers, 1.65" Runners
- With 2.5" Cross Pipe
- Bolt On Fit, No Need To Cut or Relocate Other Parts
- 3" Stainless Downpipe

T76 Turbo and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Wet Floating Bearings
- Standard T4 Flange
- 76mm Wheel Compressor
- P Trim .81 A/R Turbine
- 3" V-band Hot Side
- Dual 44 mm Vband 8 PSI Wastegates
- Comes with Oil Line Kit

Intercooler Kit:
- Core Size 24"X12"X4"
- Overall Size 31"x12"x4"
- 3" Inlet & Outlet
- Mandrel Bent Aluminum Piping Kit
- 3" Mandrel Bent Pipe
- Intercooler Comes with Aluminum Brackets
- 50mm BOV, Silicon Hoses and Clamps

Notes:
- Off Road or Track Use ONLY, NOT for Street Use.
- Due to The Complexity of Swapping a Motor to Different Chassis, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project.
- Parts Being Sold are The Kit Being Advertised ONLY. Other Parts Shown On Pictures are For Demo Only (of Our Complete Swap Kit). Check Our Other Website Items.

Optional One Dual Ball Bearing Turbos is Available with Extra Payment, Please Select the Ball Bearing Option When Buying.
 

Click Below Picture to See Flowbench Test of the Intercooler:   

Highlights:
- Especially Designed, Made for the Application Stated
- Fully Tested, Simple Easy Installation
- Offers Excellent Performance Gains

Items_Included:
- Headers + Cross Pipe+ Downpipe
- T76 Turbo Charger + Dual 44 mm WG + Oil Line kit
- Front Mount Intercooler + Brackets + Aluminum Piping Kit
- 50mm Blow Off Valve
- Silicon Hoses and Clamps
- Vband Clamps

Note: Engine Mounts + Transmission Mount, Oil Pan, Radiator Kit Are Not Included.

      

Write a review

Please login or register to review

Turbo Header Manifold Downpipe Intercooler Piping Kit For 79-93 Ford Mustang LS1 LSx Swap

  • Brand: CXRacing
  • Product Code: TRB-KIT-LS-MSTG7993-T76-IC
  • Availability: In Stock
  • $2,395.00


Available Options


Tags: CXRacing T76 Turbo Header Downpipe + Intercooler Piping Kit For 1979-1993 Fox Body Ford Mustang with GM LS1 Engine Swap This Is CXRacing's Latest Turbo Kit for Fox Body Mustang LS1 Swap, Bolt On Fitment, Makes Big Power: - T76 with 0.81 Exhaust AR Supports 700 HP with Quick Spool. - Perfectly Merged Collector, Dual 44mm Vband Wastegate. - Cross Pipe Runs Under the Pulley, Cleaner Setup and Look. - Big 4" Core Intercooler - 50MM BOV. - 3" Aluminum Piping. - 3" Stainless Steel Downpipe Note:This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues. Comes with: - Turbo Headers + Cross Pipe + Turbo + Wastegates + Downpipe + Intercooler and Piping Kit Notes: 1. This Kit On This Item Is Part of CXRacing's Complete LS1 Swap Kit, Some Installed Pictures Shown Below Have Other Parts from The Complete Kit, But NOT All Parts Are Included for This Item. We Offer Many Different Combinations, Please Check Our Other Items. 2. Needs Rear Sump Oil Pan. We Offer It Separately (Part #: OP-LS1-300ZX) 3. Need to Drill Oil Return Port on the Oil Pan for Turbo Oil Return. 4. Need to Work On the Exhaust System to Connect to the Downpipe (Due to Many Exhaust Options, The Downpipe Is NOT Connected to Stock Exhaust). 5. This Kit Is For Turbo Hardware ONLY, You Will Need to Upgrade Engine's Fuel System and Tune the Engine. 6. There Is NO Installation Guide Provided, However, We Show Many Installed Pictures On Car and On Engine Stand. Application: - Chassis: 1979-1993 Ford Mustang - Motor: LS1 Product Being Sold: - Turbo Headers + Cross Pipe + Turbo + Wastegates + Downpipe + Oil Line Kit + Intercooler Kit + Silicon Hoses + Clamps + Mounting Brackets Note: Engine/Transmission Mounts Kit, Radiator and Hard Pipe Kit, Oil Pan Are NOT Included. Product Info and Spec: Headers/Manifold Kit: - 304 Stainless Steel Headers, 1.65" Runners - With 2.5" Cross Pipe - Bolt On Fit, No Need To Cut or Relocate Other Parts - 3" Stainless Downpipe T76 Turbo and Wastegates: - 4" Air Inlet - 2.5" Compressed Air Outlet - Wet Floating Bearings - Standard T4 Flange - 76mm Wheel Compressor - P Trim .81 A/R Turbine - 3" V-band Hot Side - Dual 44 mm Vband 8 PSI Wastegates - Comes with Oil Line Kit Intercooler Kit: - Core Size 24"X12"X4" - Overall Size 31"x12"x4" - 3" Inlet & Outlet - Mandrel Bent Aluminum Piping Kit - 3" Mandrel Bent Pipe - Intercooler Comes with Aluminum Brackets - 50mm BOV, Silicon Hoses and Clamps



Emissions Control Warning:

It is illegal to sell, install, or offer for sale any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system. Product(s) listed here is(are) solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for use on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

All Products by CX-GARAGE are solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for used on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.