Oil Fuel Hose Line Fitting Kit for Toyota Supra 1JZGTE 2JZGTE Single Turbo

This kit is to fit Turbo oil Line/Fitting for 1JZ/2JZ Twin Turbo to Single Turbo Conversion.

Factory 1JZ or 2JZ-GTE is twin turbo, Many 1JZ or 2JZ-GTE Single Turbo Conversions Need to change the oil line setup and this kit is exactly what it is needed for Single turbo application.


This kit Comes with:

- 1x AN10 Aluminum Oil drain return Flange that bolts to the Block

- 1x AN10 Aluminum Oil drain return Flange that bolts to Turbo ( 2-Hole-Centerline Distance=51mm or 2") works for many turbos.

- 1x AN4 Aluminum Oil feed Flange (with Oil Restrictor Built in) that bolts to the Turbo (2-Hole-Centerline Distance=38mm or 1.5") works for many turbos.

- 1x AN4 Aluminum Oil Feed Flange that bolts to the Block
(one of the 2 Factory Twin Turbo oil feeds, supplys oil to Turbo)

- 1x Cap Bolt that bolts to the Block
(seals one of the 2 Factory Twin Turbo oil feeds)

- 1x AN10 Braided Oil drain return Line

- 1x AN4 Braided Oil Feed Line. Female AN4 on both ends. with 90 Degree Elbow Connector

- 1 x AN10 Straight Fitting

- 1 x AN10 90 Degree Fitting

Click Below Picture to Watch Installation Video of 2JZ-GTE Parts:

Write a review

Please login or register to review

Oil Fuel Hose Line Fitting Kit For Toyota Supra 1JZGTE 2JZGTE 1JZ 2JZ Single Turbo An10 AN4

  • Brand: CXRacing
  • Product Code: OIL-KIT-2JZGTE-9PCS
  • Availability: In Stock
  • $126.36


Tags: Oil Fuel Hose Line Fitting Kit for Toyota Supra 1JZGTE 2JZGTE Single Turbo This kit is to fit Turbo oil Line/Fitting for 1JZ/2JZ Twin Turbo to Single Turbo Conversion. Factory 1JZ or 2JZ-GTE is twin turbo, Many 1JZ or 2JZ-GTE Single Turbo Conversions Need to change the oil line setup and this kit is exactly what it is needed for Single turbo application. This kit Comes with: - 1x AN10 Aluminum Oil drain return Flange that bolts to the Block - 1x AN10 Aluminum Oil drain return Flange that bolts to Turbo ( 2-Hole-Centerline Distance=51mm or 2") works for many turbos. - 1x AN4 Aluminum Oil feed Flange (with Oil Restrictor Built in) that bolts to the Turbo (2-Hole-Centerline Distance=38mm or 1.5") works for many turbos. - 1x AN4 Aluminum Oil Feed Flange that bolts to the Block (one of the 2 Factory Twin Turbo oil feeds, supplys oil to Turbo) - 1x Cap Bolt that bolts to the Block (seals one of the 2 Factory Twin Turbo oil feeds) - 1x AN10 Braided Oil drain return Line - 1x AN4 Braided Oil Feed Line. Female AN4 on both ends. with 90 Degree Elbow Connector - 1 x AN10 Straight Fitting - 1 x AN10 90 Degree Fitting



Emissions Control Warning:

It is illegal to sell, install, or offer for sale any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system. Product(s) listed here is(are) solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for use on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

All Products by CX-GARAGE are solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for used on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.