AN10 Oil Line Feed + Drain Kit for Turbo Application

This kit is most complete Oil line kit for NA to Turbo Conversion. No Weld is needed on the Oil Pan, All Bolt on.

All flange/fitting are CNC quality, not the Cast Junk ones like others.

Oil Feed is AN4, with AN4 oil feed line, AN4 oil Feed fitting with built in oil restrictor to provide proper oil to turbo.

Drain is AN10, with AN10 drain flange bolt to the turbo and AN10 Bolt on adapter to oil pan (no welding).


This kit Comes with:

- 1x AN10 Aluminum Oil drain return Flange that bolts to Turbo ( 2-Hole-Centerline Distance=51mm or 2") works for many turbos.

- 1x AN4 Aluminum Oil feed Flange (with Oil Restrictor Built in) that bolts to the Turbo (2-Hole-Centerline Distance=38mm or 1.5") works for many turbos.

- 1x AN10 Stainless Oil Return Fitting that bolts to the oil Pan. Our unique design does not require welding on the oil pan, just bolt inside and out.

- 1x AN10 Braided Oil drain return Line, 2 ft long.

- 1x AN4 Braided Oil Feed Line. Comes with 4 way Splitter and cap.

- 1 x AN10 Straight Fitting

- 1 x AN10 90 Degree Fitting

Write a review

Please login or register to review

Universal Turbo Oil Line Kit Feed Return Drain Pan Plug 4AN 10AN

  • Brand: CXRacing
  • Product Code: OIL-KIT-AN10-7PCS-AN10-S90
  • Availability: In Stock
  • $115.53


Tags: AN10 Oil Line Feed + Drain Kit for Turbo Application This kit is most complete Oil line kit for NA to Turbo Conversion. No Weld is needed on the Oil Pan, All Bolt on. All flange/fitting are CNC quality, not the Cast Junk ones like others. Oil Feed is AN4, with AN4 oil feed line, AN4 oil Feed fitting with built in oil restrictor to provide proper oil to turbo. Drain is AN10, with AN10 drain flange bolt to the turbo and AN10 Bolt on adapter to oil pan (no welding). This kit Comes with: - 1x AN10 Aluminum Oil drain return Flange that bolts to Turbo ( 2-Hole-Centerline Distance=51mm or 2") works for many turbos. - 1x AN4 Aluminum Oil feed Flange (with Oil Restrictor Built in) that bolts to the Turbo (2-Hole-Centerline Distance=38mm or 1.5") works for many turbos. - 1x AN10 Stainless Oil Return Fitting that bolts to the oil Pan. Our unique design does not require welding on the oil pan, just bolt inside and out. - 1x AN10 Braided Oil drain return Line, 2 ft long. - 1x AN4 Braided Oil Feed Line. Comes with 4 way Splitter and cap. - 1 x AN10 Straight Fitting - 1 x AN10 90 Degree Fitting



Emissions Control Warning:

It is illegal to sell, install, or offer for sale any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system. Product(s) listed here is(are) solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for use on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

All Products by CX-GARAGE are solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for used on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.