CXRacing Intercooler + Piping Pipe Tube Kit + Turbo Intake Air Filter Kit For Subaru BRZ/ Scion FRS with 2JZ-GTE Swap with Single Turbo Upgrade

Intercooler + Piping + Hoses + Clamps + BOV+ Brackets + Intake Pipe + Air Filter

Bar and Plate Intercooler

2.5" Hot Side and 3" Cold Side Piping Kit, New Low Profile Turbo Outlet Pipe, Clears Hood Clearance

3" Intake Pipe, With MAF Flange Welded

Note:

This Is A Proprietary Design By CXRacing, Fits CXRacing's 2JZGTE/BRZ/FRS Swap Kit. If You Use Different Engine Mount and Turbo Manifold, Fitment Will Be Off and the Pipe Connects to Turbo Will Need Modification

Radiator Hard Pipe Kit Shown On Installed Pictures Is NOT Included, We Offer It With Other Kits, Please Check Our website


Application(s):
- Chassis: Subaru BRZ/ Scion FRS
- Motor: Toyota 2JZ-GTE
- Turbo: Single Turbo (Not for Stock Twin Turbo)

PRODUCT(S):
- 1x Aluminum Intercooler, With Mounting Brackets
- 1x Aluminum Piping Kit
- 1x Set of Silicon Hose (Blue or Black)
- 1x Set of T-bolt Clamp
- 1x Blow Off Valve
- 1x Air Filter

Technical Specifications:
- Intercooler: Bar & Plate Intercooler, 23"x9.5"x3.5" Core Size, 33"x9.5"x3.5" Overall Size, 3.5" Thickness Core, 2.5" Inlet/Outlet
- Piping Kit: Mandrel Bent Aluminum Pipe, Comes with BOV , Air Filter , Silicon Hoses, and T-Bolt Clamps

Installed Photos:


































Write a review

Please login or register to review

Intercooler Pipe Tube Kit Turbo Intake For Subaru BRZ/ Scion FRS 2JZ-GTE Single Turbo

  • Brand: CXRacing
  • Product Code: KIT-2JZGTE-ST-BRZ-IC0058-AI
  • Availability: In Stock
  • $562.73


Available Options


Tags: CXRacing Intercooler + Piping Pipe Tube Kit + Turbo Intake Air Filter Kit For Subaru BRZ/ Scion FRS with 2JZ-GTE Swap with Single Turbo Upgrade Intercooler + Piping + Hoses + Clamps + BOV+ Brackets + Intake Pipe + Air Filter Bar and Plate Intercooler 2.5" Hot Side and 3" Cold Side Piping Kit, New Low Profile Turbo Outlet Pipe, Clears Hood Clearance 3" Intake Pipe, With MAF Flange Welded Note: This Is A Proprietary Design By CXRacing, Fits CXRacing's 2JZGTE/BRZ/FRS Swap Kit. If You Use Different Engine Mount and Turbo Manifold, Fitment Will Be Off and the Pipe Connects to Turbo Will Need Modification Radiator Hard Pipe Kit Shown On Installed Pictures Is NOT Included, We Offer It With Other Kits, Please Check Our website Application(s): - Chassis: Subaru BRZ/ Scion FRS - Motor: Toyota 2JZ-GTE - Turbo: Single Turbo (Not for Stock Twin Turbo)



Emissions Control Warning:

It is illegal to sell, install, or offer for sale any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system. Product(s) listed here is(are) solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for use on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

All Products by CX-GARAGE are solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for used on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.