CXRacing Intake Manifold + Fuelrail Kit for 1975-1978 Nissan 280Z / Fairlady Z L28/L28E Engine

This Kit is Designed and Made for Nissan 280Z, Brand New Aluminum Intake System.

Due to the Original Factory Design Which Has the Intake and Exhaust Manifolds Integrated Together, This Intake Manifold is Designed to Work with CXRACING's Exhaust Manifold ONLY, or You Will Need to Build A New Exhaust Manifold Based Off This Intake Manifold.

It Is NOT Compatible with Factory Exhaust or Any Other Exhaust System. Do NOT Purchase This Manifold Unless You Will Build a New Custom Exhaust System.
 
New Intake System:
-Aluminum Intake Manifold
-Built-in Velocity Stack for Each Cylinder, Smoother Air Flows
-Aluminum Fuelrail, AN8 Inlet/Outlet. Fits BOSH Style Injectors, 14mm O-Rings Slots and 60mm Length, Such as EV14L
-80mm Throttle Body Provision (See Picture for Bolt Pattern and Size). Throttle Body NOT Included.
-3x 1/8 NPT Vacuum Ports

Note:
Injectors, Fuel Lines, Throttle Body Are NOT Included.


Application:
Chassis: 1975-1978 Nissan 280Z / Fairlady Z
Engine: L28/L28E

Product(s):
x1 Aluminum Intake Manifold with Fuelrail ONLY





























Write a review

Please login or register to review

Aluminum Intake Manifold Fuelrail For Nissan 280Z Fairlady Z L28E L28 Engine

  • Brand: CXRacing
  • Product Code: IM-L28-280Z
  • Availability: In Stock
  • $772.73


Tags: CXRacing Intake Manifold + Fuelrail Kit for 1975-1978 Nissan 280Z / Fairlady Z L28/L28E Engine This Kit is Designed and Made for Nissan 280Z, Brand New Aluminum Intake System. Due to the Original Factory Design Which Has the Intake and Exhaust Manifolds Integrated Together, This Intake Manifold is Designed to Work with CXRACING's Exhaust Manifold ONLY, or You Will Need to Build A New Exhaust Manifold Based Off This Intake Manifold. It Is NOT Compatible with Factory Exhaust or Any Other Exhaust System. Do NOT Purchase This Manifold Unless You Will Build a New Custom Exhaust System.   New Intake System: -Aluminum Intake Manifold -Built-in Velocity Stack for Each Cylinder, Smoother Air Flows -Aluminum Fuelrail, AN8 Inlet/Outlet. Fits BOSH Style Injectors, 14mm O-Rings Slots and 60mm Length, Such as EV14L -80mm Throttle Body Provision (See Picture for Bolt Pattern and Size). Throttle Body NOT Included. -3x 1/8 NPT Vacuum Ports Note: Injectors, Fuel Lines, Throttle Body Are NOT Included. Application: Chassis: 1975-1978 Nissan 280Z / Fairlady Z Engine: L28/L28E Product(s): x1 Aluminum Intake Manifold with Fuelrail ONLY



Emissions Control Warning:

It is illegal to sell, install, or offer for sale any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system. Product(s) listed here is(are) solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for use on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

All Products by CX-GARAGE are solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for used on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.