CXRacing Twin Turbo Manifold/Header Downpipe Kit For 1963-1965 Chevrolet Chevelle with LS1/LSx Motor Swap, Twin Turbo Setup

Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle.

Fits T4 Turbo with 3" Vband Exhaust Outlet. 46mm Vband Wastegate

Note:

This Is A Proprietary Design By CXRacing, Fits with CXRacing's Engine Mount Kit Which Positions The Engine Low, The Top Of the Intake Manifold Has 5.5" Clearance to the Upper Edge of the Firewall. See Pictures Below. If Your Engine Sits Differently, The Downpipe Might Hit the Firewall.

This Aution Is For the Header/Downpipe Hardware Kit ONLY. There Are Many Other Parts Shown on Installed Pictures, NOT All Of Them Are Included. ONLY the Items Listed On "Items Included" Are Being Sold, Nothing Else.


This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues.

Application:
Chassis: 1963-1965 Chevrolet Chevelle
Motor: LS1/LSx

No Installation Instruction Is Provided. But We Show Many Installed Pictures on This Kit and Installation Notes. It Is Very Intuitive

Product Being Sold:
Manifold/Header Kit with Downpipe and Wastegate Dump Tube + V-band Clamps

This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation.

Product Info and Spec:

Manifolds:
Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
1.65" Runner
3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
T4 Turbo Flange (to Turbo Side)
3" Vband FLange (to Header Side)
Cast 304 Stainless Steel

Downpipe and Dump Tube:
Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
Dual 46mm WG Dump Tube

Notes:

-Off Road or Track Use ONLY, NOT for Street Use

-Due to the Complexity of Swapping a Motor to Different Chassis, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project

-Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only (of Our Complete Swap Kit). Check Our Other Products

                                                       

Write a review

Please login or register to review

Twin Turbo Manifold Header Downpipe For 63-65 Chevrolet Chevelle LS1 LSx Swap

  • Brand: CXRacing
  • Product Code: MF-KIT-LS-TT-CHEVELLE-ONLY
  • Availability: In Stock
  • $1,070.07


Tags: CXRacing Twin Turbo Manifold/Header Downpipe Kit For 1963-1965 Chevrolet Chevelle with LS1/LSx Motor Swap, Twin Turbo Setup Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle. Fits T4 Turbo with 3" Vband Exhaust Outlet. 46mm Vband Wastegate Note: This Is A Proprietary Design By CXRacing, Fits with CXRacing's Engine Mount Kit Which Positions The Engine Low, The Top Of the Intake Manifold Has 5.5" Clearance to the Upper Edge of the Firewall. See Pictures Below. If Your Engine Sits Differently, The Downpipe Might Hit the Firewall. This Aution Is For the Header/Downpipe Hardware Kit ONLY. There Are Many Other Parts Shown on Installed Pictures, NOT All Of Them Are Included. ONLY the Items Listed On "Items Included" Are Being Sold, Nothing Else. Application: Chassis: 1963-1965 Chevrolet Chevelle Motor: LS1/LSx No Installation Instruction Is Provided. But We Show Many Installed Pictures on This Kit and Installation Notes. It Is Very Intuitive Product Being Sold: Manifold/Header Kit with Downpipe and Wastegate Dump Tube + V-band Clamps This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation. Product Info and Spec: Manifolds: Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate 1.65" Runner 3" Vband Outlet with 46mm WG Flange Turbo Elbow: T4 Turbo Flange (to Turbo Side) 3" Vband FLange (to Header Side) Cast 304 Stainless Steel Downpipe and Dump Tube: Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing Dual 46mm WG Dump Tube



Emissions Control Warning:

It is illegal to sell, install, or offer for sale any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system. Product(s) listed here is(are) solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for use on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

All Products by CX-GARAGE are solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for used on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.