CXRacing LS1 Engine + Steering Rack Extension Kit + T56 Transmission Mount Mount + Sub-Frame Enforced Bracer + Torsion Bar Enforced Bracer + Sway Bar Extension Kit + Sway Bar spacer Kit + Header For Mazda RX-8 with LS1/LSx Motor and T56 Transmission Swap

There Are Few Known Issues For LS1 / RX-8 Swap:
1. Sway Bar Hits Engine
2. Steering Rack Hits Engine
3. Factory Sub-Frame Is Too Weak
4. Factory Torsion Bar Is Too Weak

We Have Developed a Completed Solution/Kit for LS1/RX8 Swap, Addressed All Issues Stated Above. Our Kit Is Designed and Engineered to Support LS1 Swap On RX8, Easy Install, Bolt On Fitment, No Cut, No Relocation, With the Following Features:

1. Engine Mount Kit Integrated with Steering Rack Extension. Fits/Supports Both LS1 Engine and RX-8 Steering Rack (Note: RX-8 Uses Electronic Power Steering Rack, Which Is Difficult to Make It Works. Many People Use RX-7 Rack. This Mount Kit Supports Factory RX-8 Rack).
2. Sway Bar Extension Kit Extends Sway Bar by 5.5", Clears Lots Of Room.
3. Torsion Bar Bracer Adds Extra Support for Factory Torsion Bar.
4. Sub-Frame Bracer Adds Extra Support for Factory Sub-Frame.

Note: Above Stated Items/Kits Are Sub-Components Of Our Completed Swap Kit. We List Them to Explain the Technical Requirements for the LS1/RX8 Swap ONLY. We Offer Them In Many Different Combinations to Meet Your Needs. NOT All Parts Are Included In This Item.

ONLY Parts Listed On "Product Being Sold" and "Items Included" Are the Actual Items Being Sold By This Item.

Also If You ONLY Buy Some of Our Sub-Kits and Use The Rest From Other Vendors, Compatibility Might Be An Issue and Fitment Is NOT Guaranteed

Part (s) Being Sold Has One or More Registered Patent(s)


Application:
-Chassis: Mazda RX8
-Motor: LS1/LSx
-Transmission: T56 Manual

Product Being Sold:
-Engine Mounts (Integrated with Steering Rack Extension Mount)+ Transmission Mount + Steering Rack Extension Kit + Sub-Frame Enforced Bracer + Torsion Bar Enforced Bracer + Sway Bar Extension Kit + Sway Bar spacer Kit + Header
-This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation.

Product Info and Spec:
-Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
-Adjustable Slotted Bolt Holes
-Polyurethane Bushing Mounts
-Patented Design of Motor Mount, Excellent Strength

Header:
-Equal Length Runners for Best Performance Gain
-Long Tube Design for More Power and Torque
-1.65" OD Stainless Steel Mandrel Bent Tube Runner
-3" Vband Ends for Easy Adaptation of the Rest Exhaust System

Notes:
-Off Road or Track Use ONLY, NOT for Street Use
-Due to the Complexity of Swapping a Motor to Different Chassis, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project
-Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only (of Our Complete Swap Kit). Check Our Other Website Items.

This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues.


 
 
 
 
 
Highlights:
-Especially Designed, Made for the Application Stated
-Fully Tested, Simple Easy Installation
-Offers Excellent Performance Gains
-One of the Best Kits on the Market, with High Quality Products and Affordable Pricing

Items_Included:
-Engine Mount
-Transmission Mount
-Torsion Bar Enforced Bracer
-Sway Bar Extension Kit
-Sway Bar spacer Kit
-Sub-Frame Enforced Bracer
-Steering Rack Extension Kit
-Header

Below Are Installation Pictures:


 
Installed Pictures for Engine Mount and Steering Rack Extension:


 
 
Use Aluminum Spacer for Steering Rack:


 
 
 
 
 
Installed Pictures for Torsion Bar Enforced Bracer:


 
 
 
Installed Pictures for T56 Transmission Mount:


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Write a review

Please login or register to review

LS1 Swap Kit Torsion Bar Subframe Bracer Sway Bar Header for Mazda RX-8

  • Brand: CXRacing
  • Product Code: ESK-HD-RX8-ALL
  • Availability: In Stock
  • $1,884.76


Tags: CXRacing LS1 Engine + Steering Rack Extension Kit + T56 Transmission Mount Mount + Sub-Frame Enforced Bracer + Torsion Bar Enforced Bracer + Sway Bar Extension Kit + Sway Bar spacer Kit + Header For Mazda RX-8 with LS1/LSx Motor and T56 Transmission Swap There Are Few Known Issues For LS1 / RX-8 Swap: 1. Sway Bar Hits Engine 2. Steering Rack Hits Engine 3. Factory Sub-Frame Is Too Weak 4. Factory Torsion Bar Is Too Weak We Have Developed a Completed Solution/Kit for LS1/RX8 Swap, Addressed All Issues Stated Above. Our Kit Is Designed and Engineered to Support LS1 Swap On RX8, Easy Install, Bolt On Fitment, No Cut, No Relocation, With the Following Features: 1. Engine Mount Kit Integrated with Steering Rack Extension. Fits/Supports Both LS1 Engine and RX-8 Steering Rack (Note: RX-8 Uses Electronic Power Steering Rack, Which Is Difficult to Make It Works. Many People Use RX-7 Rack. This Mount Kit Supports Factory RX-8 Rack). 2. Sway Bar Extension Kit Extends Sway Bar by 5.5", Clears Lots Of Room. 3. Torsion Bar Bracer Adds Extra Support for Factory Torsion Bar. 4. Sub-Frame Bracer Adds Extra Support for Factory Sub-Frame. Note: Above Stated Items/Kits Are Sub-Components Of Our Completed Swap Kit. We List Them to Explain the Technical Requirements for the LS1/RX8 Swap ONLY. We Offer Them In Many Different Combinations to Meet Your Needs. NOT All Parts Are Included In This Item. ONLY Parts Listed On "Product Being Sold" and "Items Included" Are the Actual Items Being Sold By This Item. Also If You ONLY Buy Some of Our Sub-Kits and Use The Rest From Other Vendors, Compatibility Might Be An Issue and Fitment Is NOT Guaranteed Part (s) Being Sold Has One or More Registered Patent(s) Application: -Chassis: Mazda RX8 -Motor: LS1/LSx -Transmission: T56 Manual Product Being Sold: -Engine Mounts (Integrated with Steering Rack Extension Mount)+ Transmission Mount + Steering Rack Extension Kit + Sub-Frame Enforced Bracer + Torsion Bar Enforced Bracer + Sway Bar Extension Kit + Sway Bar spacer Kit + Header -This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation. Product Info and Spec: -Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support -Adjustable Slotted Bolt Holes -Polyurethane Bushing Mounts -Patented Design of Motor Mount, Excellent Strength Header: -Equal Length Runners for Best Performance Gain -Long Tube Design for More Power and Torque -1.65" OD Stainless Steel Mandrel Bent Tube Runner -3" Vband Ends for Easy Adaptation of the Rest Exhaust System Notes: -Off Road or Track Use ONLY, NOT for Street Use -Due to the Complexity of Swapping a Motor to Different Chassis, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project -Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only (of Our Complete Swap Kit). Check Our Other Website Items. This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues.



Emissions Control Warning:

It is illegal to sell, install, or offer for sale any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system. Product(s) listed here is(are) solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for use on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

All Products by CX-GARAGE are solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for used on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.