| CXRacing 3" Stainless Steel Mid Pipe For 89-99 Nissan 240SX S13 S14 S15 With 1JZ-GTE Or 2JZ-GTE Swap |
| This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues. |
| Application: |
| Chassis: 89-98 Nissan 240SX S13 S14 S15 (Parts Are Developed From US Model Left Hand Drive Chassis, But Fits Both LHD And RHD) |
| Motor: Toyota 1JZ-GTE, 2JZ-GTE Or Any Motor That Has Exhaust On The Right Hand Side |
| Product Being Sold: |
| 3" Stainless Steel Mid Pipe |
| For Toyota Motors Or Any Motor That Has Exhaust On The Right Hand Side, Its Exhaust System Runs Oppositely Compare To Stock 240SX Which Is On The Left Side, This Mid Pipe Is Designed To Convert The Stock 240SX Catback System From Left To Right Hand Side. |
| This Mid Pipe Does NOT Come With The Complete System, It ONLY Flips The Mide Pipe From Left To Rigth Hand Side, So That You Can Build The Rest Of The Exhaust System To Meet Your Project Needs. Over The Years, Many 240SX Have Changed Their Exhaust System With 3" Catback System Commonly Sold On The Market. This Mid Pipe Should Fit (But Not Guaranteed) Most Of The Existing Catback System, As Long As It Is Based On Factory Catback Provision. This Saves You Money Of Buying The Complete System (We Do Offer The Complete System, Check Out Other Items) |
| This is CXRacing's Newest Products For The Application Stated Above. All Parts Are Developed From Ground Up In Our R&D Center In USA, Designed And Built For Improved Performance Gains, With Excellent Fitment And Easy Installation. |
| Product Info and Spec: |
| Downpipe: |
| 3" Stainless Steel Pipe, 2 Bolt 3" Flange |
| Notes: |
| - Off Road or Track Use ONLY, NOT For Street Use |
| - Due To The Complexity Of Swapping A Motor To Different Chassis, Please Make Sure That You Understand The Application Stated Here Are The Right Parts For Your Project |
| - Parts Being Sold Are The Kit Being Advertised ONLY. Other Parts Shown On Pictures Are For Demo Only (Of Our Complete Swap Kit). Check Our Other Items. |
 |
 |
 |
| Highlights: |
| - Especially Designed, Made For The Application Stated |
| - Fully Tested, Simple Easy Installation |
| - Offers Excellent Performance Gains |
| - One Of The Best Kits On The Market, With High Quality Products And Affordable Pricing |
| Item(s) Included: |
| 3" Stainless Exhaust Mide Pipe, 1 Pcs |
| Below Picture Shows A Complete Exhaust System For 1JZ or 2JZ Swap, Both Pipes On the Left And Right Side Are NOT Included, Middle Pipe Shown Is Being Sold Here. You Can See The Relationship Of These Pipes. |
 |
 |
 |
3" Right Hand Mid Pipe Exhaust For 240SX S13 S14 1JZ 2JZ 2JZGTE 1JZGTE
- Brand: CXRacing
- Product Code: DP-S13-MID
- Availability: In Stock
-
$199.00
Tags: CXRacing 3" Stainless Steel Mid Pipe For 89-99 Nissan 240SX S13 S14 S15 With 1JZ-GTE Or 2JZ-GTE Swap. This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues. Application: Chassis: 89-98 Nissan 240SX S13 S14 S15 (Parts Are Developed From US Model Left Hand Drive Chassis, But Fits Both LHD And RHD) Motor: Toyota 1JZ-GTE, 2JZ-GTE Or Any Motor That Has Exhaust On The Right Hand Side Product Being Sold: 3" Stainless Steel Mid Pipe For Toyota Motors Or Any Motor That Has Exhaust On The Right Hand Side, Its Exhaust System Runs Oppositely Compare To Stock 240SX Which Is On The Left Side, This Mid Pipe Is Designed To Convert The Stock 240SX Catback System From Left To Right Hand Side. This Mid Pipe Does NOT Come With The Complete System, It ONLY Flips The Mide Pipe From Left To Rigth Hand Side, So That You Can Build The Rest Of The Exhaust System To Meet Your Project Needs. Over The Years, Many 240SX Have Changed Their Exhaust System With 3" Catback System Commonly Sold On The Market. This Mid Pipe Should Fit (But Not Guaranteed) Most Of The Existing Catback System, As Long As It Is Based On Factory Catback Provision. This Saves You Money Of Buying The Complete System (We Do Offer The Complete System, Check Out Other Items) This is CXRacing's Newest Products For The Application Stated Above. All Parts Are Developed From Ground Up In Our R&D Center In USA, Designed And Built For Improved Performance Gains, With Excellent Fitment And Easy Installation. Product Info and Spec: Downpipe: 3" Stainless Steel Pipe, 2 Bolt 3" Flange Notes: - Off Road or Track Use ONLY, NOT For Street Use - Due To The Complexity Of Swapping A Motor To Different Chassis, Please Make Sure That You Understand The Application Stated Here Are The Right Parts For Your Project - Parts Being Sold Are The Kit Being Advertised ONLY. Other Parts Shown On Pictures Are For Demo Only (Of Our Complete Swap Kit). Check Our Other Items.