CXRacing Turbo Kit For 1986-1992 Toyota Supra MK3 with 7MGTE Turbo Engine

Application:
- Chassis: 1986-1992 Toyota Supra MK3
- Motor: 7MGTE

Note:This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues.

Product Being Sold:
Turbo + Intercooler kit + DownPipe + Oil Line Kit

Bolt On Fit, CXRACING's NEWLY Released Turbo kit, Fully Tested.

This turbo is an Upgrade to Stock CT26 Turbo, but Keeps the Stock Manifold and Stock MAF, bolt on Upgrade, Good for 350~400 HP.

This kit is very simple and easy to install, almost no need to relocate any other parts, Bolt on fitment. It is the best Solution to upgrade your Supra without doing major changes.

This Kit Replaces the Following Stock Parts:
- Upgrade Stock CT26 to T61 Turbo, keeps same Exhaust Housing Bolts Pattern.
- Upgrade Stock Cast Turbo Elbow Pipe with Stainless Elbow pipe, 3". A lot more Better Flow.
- Upgrade Stock Downpipe to 3" Stainless Downpipe.
- Completely replaced Stock Intercooler and piping with High Performance Bar and Plate Intercooler and 2.5" Aluminum Piping kit, Bolt on fit.

Product Info and Spec:
Turbo：
- 3" Air Inlet, 2.5" Compressed Air Outlet
- Journal Bearing
- 8PSI Internal Wastegate
- .50 A/R Compressor , .63 A/R Turbine
- 60 Trim Compressor Wheel , Exducer: 84mm , Mayor:66.6mm
- Turbine Wheel: 74.6mm Exducer, 64.6mm Mayor

DownPipe:
- 3" Downpipe
- 304 Stainless Steel

Intercooler Kit:
- Bar & Plate Intercooler
- Overall size: 27"x15"x3"
- 2.5" Inlet & Outlet, 3" Core
- 2.5" Polished Aluminum Piping
- Come with BOV, Bracket, Silicon Hoses and Clamps

Notes:
- We do offer another Aftermarket Turbo upgrade kit that support bigger HP, check our other Website Items.

Click Below Picture to See Flowbench Test of the Intercooler:

Highlights:
- Newly Developed and New Design, Bolts on fitment to MK3
- Keeps Stock Manifold
- Bolt on Upgrade of Turbo, Turbo Elbow pipe, Downpipe, Intercooler, Piping, and BOV.
- Instant ~ 30 to 50 HP gain without tuning. 100 to 150 HP gain with Tuning and Fuel System upgrade
- Comes with Aluminum Bracket, Secure, Nice and Professional Looking.
- Keeps Bumper Support
- High Performance Bar and Plate intercooler
- High Quality Silicon hoses and Stainless T-Blot Clamps
- With BOV Flange welded, comes with BOV

Items_Included:
- Front Mount Intercooler, 3" Core, with Aluminum Mounting Bracket
- T6 Turbo, with Internal Wastegate, 8 PSI.
- 2.5" Aluminum Piping kit, with Silicon Hoses and T-Bolt Clamps
- 3" Turbo Elbow Pipe
- 3" Downpipe
- Blow Off Valve
- Oil Line Kit

Below Are Installation Pictures: