• Your shopping cart is empty!

CXRacing Turbo Header/Manifold Kit For 2005-2013 Chevrolet Corvette C6. Comes with Headers, Cross Pipe, and Wastegate Dump Tube

Downpipe, Turbo, Wastegate, Intercooler and Radiator Kits Are NOT Included. We Offer Them Separately, Check Our Other Products.

This Is Our Innovated Design For Corvette C6, No Cut, Bolt On Fitment. Easy Install and Makes Big Power.

Supports T4 Turbo with 3.5" Vband Exhaust Housing

Dual 46mm Vband Wastegates Provision, One for Each 4 Cylinders

Turbo Headers Connected via A Perfectly Merged Turbo Adapter for The Best Air Flow

2.5" Header Cross Pipe

Note:
1. This Aution Is For Header Kit ONLY. Downpipe, Turbo, Wastegate, Intercooler Kit and Radiator Kit Are NOT Included.

2. This Is A Proprietary Design By CXRacing, Needs to Remove Stock Radiator, A/C Condenser to Fit the Kit. It Might or Might Not Have Enough Room in the Front for Radiator and Intercooler if You Are Not Using CXRacing's Matching Products.

This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues.

Application:

Chassis: 2005-2013 Chevrolet Corvette C6
Engine: LS3

Product Being Sold:
Turbo Headers + Cross Pipe + Turbo Adapter + Vband Clamps

Product Info and Spec:

Headers/Manifold：
304 Stainless Steel Headers, 1.65" Runners
2.5" Cross Pipe

Notes:

Off Road or Track Use ONLY, NOT for Street Use.

Due to The Complexity of Swapping a Motor to Different Chassis, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project.

Parts Being Sold are The Kit Being Advertised ONLY. Other Parts Shown On Pictures are For Demo Only (of Our Complete Swap Kit). Check Our Other Products.
　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 26 　 　 　 　 　 　 　 　

Write a review

Please login or register to review

Turbo Manifold Header Kit For 05-13 Chevrolet Corvette C6 LS LS3 NA-T

  • Brand: CXRacing
  • Product Code: MF-KIT-LS-C6-ONLY
  • Availability: In Stock

  • $1,165.00


0 reviews / Write a review

Tags: CXRacing Turbo Header/Manifold Kit For 2005-2013 Chevrolet Corvette C6. Comes with Headers, Cross Pipe, and Wastegate Dump Tube Downpipe, Turbo, Wastegate, Intercooler and Radiator Kits Are NOT Included. We Offer Them Separately, Check Our Other Products. This Is Our Innovated Design For Corvette C6, No Cut, Bolt On Fitment. Easy Install and Makes Big Power. Supports T4 Turbo with 3.5" Vband Exhaust Housing Dual 46mm Vband Wastegates Provision, One for Each 4 Cylinders Turbo Headers Connected via A Perfectly Merged Turbo Adapter for The Best Air Flow 2.5" Header Cross Pipe Note: 1. This Aution Is For Header Kit ONLY. Downpipe, Turbo, Wastegate, Intercooler Kit and Radiator Kit Are NOT Included. 2. This Is A Proprietary Design By CXRacing, Needs to Remove Stock Radiator, A/C Condenser to Fit the Kit. It Might or Might Not Have Enough Room in the Front for Radiator and Intercooler if You Are Not Using CXRacing's Matching Products. Application: Chassis: 2005-2013 Chevrolet Corvette C6 Engine: LS3 Product Being Sold: Turbo Headers + Cross Pipe + Turbo Adapter + Vband Clamps Product Info and Spec: Headers/Manifold： 304 Stainless Steel Headers, 1.65" Runners 2.5" Cross Pipe



Emission Notes:

All Parts and services offered by CX-GARAGE are for competition vehicles only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this competition use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assumes all associated risk of the purchase.

Federal and several state laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. CX-GARAGE assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer’s modifications and/or use of CX-GARAGE products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.